大功率固态脉冲形成线研究进展

 固态化是脉冲功率技术发展的新趋势。综述了中国工程物理研究院流体物理研究所在大功率固态脉冲形成线方面的研究进展,给出了基于铁电陶瓷及玻璃-陶瓷复合材料的固态脉冲形成线绝缘强度、脉冲放电特性等方面的最新结果。对基于铁电陶瓷及玻璃-陶瓷复合材料的固态脉冲形成线的脉冲特性进行了分析和探索。     

细线径螺旋线长脉冲产生技术

 提出了双路输出的螺旋脉冲形成线(PFL)结构,该结构内置用于充电的高耦合变压器,在螺旋PFL的两端各自输出一个脉冲,副路匹配输出时主路输出脉冲波形具有良好的平顶品质,主路输出脉冲能量占储能的大部分,解决了Korovin提出的螺旋PFL充电问题。对比分析双路输出的螺旋 PFL与SINUS-700/130两种技术路线,结果发现双路输出的螺旋 PFL改善了输出脉冲的平顶质量,输出功率提高29%,但是副路输出占用11%的储能,不易充分利用。     

无约束优化的一个充分下降共轭梯度算法

在修正PRP共轭梯度法的基础上,提出了求解无约束优化问题的一个充分下降共轭梯度算法,证明了算法在Wolfe线搜索下全局收敛,并用数值实验表明该算法具有较好的数值结果.     

A sufficient descent LS conjugate gradient method for unconstrained optimization problems

In this paper, we make a modification to the Liu-Storey (LS) conjugate gradient method and propose a descent LS method. The method can generate sufficient descent directions for the objective function. This property is independent of the line search used. We prove that the modified LS method is globally convergent with the strong Wolfe line search. The numerical results show that the proposed descent LS method is efficient for the unconstrained problems in the CUTEr library.     

Bi-criteria assembly line balancing by considering flexible operation times

This paper addresses a novel approach to deal with Flexible task Time Assembly Line Balancing Problem (FTALBP). In this regard, machines are considered in which operation time of each task can be between lower and upper bounds. These machines can compress the processing time of tasks, but this action may lead to higher cost due to cumulative wear, erosion, fatigue and so on. This cost is described in terms of task time via a linear function. Hence, a bi-criteria nonlinear integer programming model is developed which comprises two inconsistent objective functions: minimizing the cycle time and minimizing the machine total costs. In order to sustain these objectives concurrently, this paper applies the LP-metric method to make a combined dimensionless objective. Moreover, a genetic algorithm (GA) is presented to solve this NP-hard problem and design of experiments (DOE) method is hired to tune various parameters of our proposed algorithm. The computational results demonstrate the effectiveness of implemented procedures.     

Incorporating ergonomic risks into assembly line balancing

In manufacturing, control of ergonomic risks at manual workplaces is a necessity commanded by legislation, care for health of workers and economic considerations. Methods for estimating ergonomic risks of workplaces are integrated into production routines at most firms that use the assembly-type of production. Assembly line re-balancing, i.e., re-assignment of tasks to workers, is an effective and, in case that no additional workstations are required, inexpensive method to reduce ergonomic risks. In our article, we show that even though most ergonomic risk estimation methods involve nonlinear functions, they can be integrated into assembly line balancing techniques at low additional computational cost. Our computational experiments indicate that re-balancing often leads to a substantial mitigation of ergonomic risks.     

Line graphs of multigraphs and Hamilton‐connectedness of claw‐free graphs

We introduce a closure concept that turns a claw‐free graph into the line graph of a multigraph while preserving its (non‐)Hamilton‐connectedness. As an application, we show that every 7‐connected claw‐free graph is Hamilton‐connected, and we show that the well‐known conjecture by Matthews and Sumner (every 4‐connected claw‐free graph is hamiltonian) is equivalent with the statement that every 4‐connected claw‐free graph is Hamilton‐connected. Finally, we show a natural way to avoid the non‐uniqueness of a preimage of a line graph of a multigraph, and we prove that the closure operation is, in a sense, best possible. © 2010 Wiley Periodicals, Inc. J Graph Theory 66:152‐173, 2011     

窄线SeyfertⅠ型星系

本文将概述窄线SeyfertⅠ型星系 (包括具有类似性质但光度较大的类星体 )的主要观测特征、物理内涵及其理论解释和在活动星系核内部结构上的反映。窄线SeyfertⅠ型星系 (NLS1 ,以后NLS1都认为包括NLSI星系和NLS1类星体 )具有窄的允许线Hβ,它兼有Sy1和Sy2的某些特征。它具有强的FeⅡ光学线和弱的 [OⅢ ]λ5 0 0 7禁线 ,这明显不同于Sy2。在观测相关量的主成分统计分析中表明NLS1是活动星系核第一主向量表现为极端的一类。这包括 :( 1 )HβFWHM取极小 ;( 2 )FeⅡλ45 70 /Hβ 取极大 ;( 3)SⅢ ]λ1 892 /CⅢ ]λ1 90 9取极大 ,亦一定范围内宽线区电子密度取大值 ;( 4 )CⅣλ1 5 4 9线中心蓝移取极大 ;( 5 )高光度NLS1的软X射线光子数谱指数Γx 取极大 ;( 6)X射线相对流量变化方差最大等。基于以上观测结构和相应统计规律 (观测量与HβFWHM的关系 ) ,解释NLS1现象最佳的模型是高相对吸积率L/LEdd模型。NLS1比之典型宽线活动星系核具有较低的中心黑洞质量MBH。进一步 ,还发现这一模型是活动星系核主...     

A novel method for measuring optical fiber delay lines based on the optical fiber low-coherence Young's interferometer

According to the principle of double-beam interference imaging using an infrared broadband light source, a novel method based on the optical fiber low-coherence Young's interferometer for the measurement of programmable optical fiber delay line is proposed. By measuring the small length increments of delay fiber through the evaluation of the central positions of zero-order interference fringes, we successfully construct a system with a variety of important functions, such as real-time controlling, measurement and displaying. This system offers the benefit that it can be regulated precisely to generate interference stripes once again after the length of fiber segment changes. When the locations of central stripes are moved to coincide with the original markers, the determination of the corresponding fiber optical delay time becomes really simplified, as just by reading out the tinny displacement of the reference arm. Multiple groups of experimental results demonstrate the outstanding performance of the proposed system since it bears a measuring accuracy of μm and a measuring range from 1 mm to 20 cm.     

A transmission line model for subwavelength metallic grating with single cut

A transmission line model for subwavelength metallic grating with single cut is presented. The model is based on analogy between the subwavelength metallic structure and the microwave transmission line theory. The analytical expression for the transmission is derived by the transfer matrix method. To confirm our model, the finite-difference time-domain (FDTD) method simulations are carried out. The influences of the position of the cuts on the higher modes of slit are presented. It is found that the transmission line model gives analytical prediction about the evolution of the transmission spectra.